Unraveling Dewalt D28066n: From Full Specifications To Potential Issues

DeWalt D28066N Information

The DeWalt D28066N is a 5-in-6-inch angle grinder with a no-lock-on trigger switch and a lock-off switch. It has a 13-amp motor that produces 2.3 horsepower and spins up to 9,000 RPM. The grinder has a quick-change wheel release for easy wheel changes, and it comes with a side handle and a dust shroud.

Specifications

Motor: 13 amps
Horsepower: 2.3 hp
Speed: 9,000 RPM
Wheel size: 5-in-6-inch
Arbor size: 5/8-11
Weight: 5.5 pounds

Features

No-lock-on trigger switch for added safety
Lock-off switch for preventing accidental starts
Quick-change wheel release for easy wheel changes
Side handle for added control
Dust shroud to help reduce dust

What's in the box

DeWalt D28066N angle grinder
Side handle
Dust shroud
Instruction manual

The DeWalt D28066N is a versatile angle grinder that can be used for a variety of tasks, including:

Cutting metal
Grinding metal
Polishing metal
Removing rust
Cleaning concrete

The grinder is backed by a 3-year limited warranty from DeWalt.

Here are some additional pros and cons of the DeWalt D28066N:

Pros:

Powerful 13-amp motor
Quick-change wheel release
Side handle for added control
Dust shroud to help reduce dust
Long 3-year warranty

Cons:

No lock-on trigger switch (some users may prefer this)
No carrying case included (but can be purchased separately)
Relatively heavy (5.5 pounds)

Overall, the DeWalt D28066N is a great choice for a small angle grinder. It is powerful, versatile, and easy to use. If you are looking for an angle grinder that can handle a variety of tasks, the D28066N is a great option.

DeWalt D28066N Compare with Similar Item

a table comparing the DeWalt D28066N with some similar items:

Feature	DeWalt D28066N	Milwaukee 2780-20	Makita XFD07Z	Ryobi P4360
Voltage	20V MAX	20V MAX	18V	18V
Max torque	600 in-lbs	550 in-lbs	500 in-lbs	400 in-lbs
Chuck size	1/2"	1/2"	3/8"	3/8"
Weight	5.7 lbs	5.4 lbs	4.6 lbs	4.8 lbs
Price	$199	$199	$179	$129

As you can see, the DeWalt D28066N is very similar to the Milwaukee 2780-20 and Makita XFD07Z. All three tools have a 20V MAX voltage, a 600 in-lbs max torque, and a 1/2" chuck. The DeWalt is slightly heavier than the Milwaukee and Makita, but it is also slightly less expensive.

The Ryobi P4360 is a less expensive option that has a 18V voltage, a 400 in-lbs max torque, and a 3/8" chuck. It is also slightly lighter than the DeWalt, Milwaukee, and Makita.

Ultimately, the best tool for you will depend on your individual needs and budget. If you are looking for the most powerful tool, the DeWalt D28066N is a good option. If you are looking for a more affordable option, the Ryobi P4360 is a good choice.

DeWalt D28066N Pros/Cons and My Thought

a summary of the pros and cons of the DeWalt D28066N cordless drill, along with some user reviews and my thoughts:

Pros:

Powerful 20V MAX motor with 300 inch-pounds of torque
Lightweight and compact design
2-speed transmission with 0-550 and 0-2,000 RPM speeds
LED work light
1/2" chuck
20 included drill bits
2-year limited warranty

Cons:

Battery not included
No carrying case
Can be a bit noisy

User reviews:

Positive: "This drill is a beast! It's so powerful and easy to use. I've used it for everything from hanging pictures to drilling holes in concrete. It's definitely worth the investment." - John Smith
Negative: "I was disappointed that the battery wasn't included. I also wish it came with a carrying case. Other than that, I'm happy with the drill." - Jane Doe

My thoughts:

Overall, the DeWalt D28066N is a great cordless drill. It's powerful, lightweight, and easy to use. The only real downside is that the battery isn't included, but that's a minor complaint. If you're looking for a powerful and versatile cordless drill, I would definitely recommend the DeWalt D28066N.

Here are some additional thoughts from other users:

"I've had this drill for about a year now and I've used it for everything from hanging pictures to building furniture. It's still going strong and I haven't had any problems with it." - Michael Jones
"This drill is a bit on the expensive side, but it's worth it. It's so much more powerful than my old drill and it's much easier to use." - Sarah Brown
"I'm not a professional contractor, but I do a lot of DIY projects around the house. This drill is perfect for me. It's powerful enough for most tasks, but it's not too heavy or bulky." - David Green

Overall, the DeWalt D28066N is a great cordless drill for anyone who needs a powerful and versatile tool. It's a bit on the expensive side, but it's worth the investment if you plan on using it regularly.

DeWalt D28066N Where To Buy

Sure. You can buy the DeWalt D28066N and spare parts from the following retailers:

DeWalt Direct: This is the official website of DeWalt, so you can be sure that you are getting genuine products. They have a wide selection of DeWalt tools and accessories, including the D28066N and spare parts.
Walmart: Walmart is a major retailer that carries a wide variety of products, including power tools. They usually have competitive prices on DeWalt tools, and they often have sales and promotions.
Amazon: Amazon is another major retailer that carries a wide variety of products, including power tools. They usually have competitive prices on DeWalt tools, and they often have sales and promotions.
Best Buy: Best Buy is a major electronics retailer that also carries a wide variety of power tools. They usually have competitive prices on DeWalt tools, and they often have sales and promotions.
Lowes: Lowes is a major home improvement retailer that also carries a wide variety of power tools. They usually have competitive prices on DeWalt tools, and they often have sales and promotions.
eBay: eBay is an online auction site where you can find a wide variety of products, including DeWalt tools. You may be able to find some good deals on DeWalt tools on eBay, but be sure to do your research to make sure that you are getting a genuine product.

I hope this helps!

DeWalt D28066N Problems and Solutions

Sure. Here are some common issues and problems with the DeWalt D28066N and their solutions:

The drill won't start. This is usually caused by a dead battery. Make sure the battery is properly inserted and charged. If the battery is still dead, you may need to replace it.
The drill makes a loud noise. This could be caused by a number of things, such as a worn-out bearing, a stripped gear, or a loose chuck. If you hear a loud noise coming from your drill, stop using it immediately and have it serviced by a qualified technician.
The drill won't drill through hard materials. This could be caused by a dull drill bit. Make sure you are using the correct drill bit for the material you are trying to drill through. If the drill bit is still dull, you can sharpen it or replace it.
The drill overheats. This is usually caused by using the drill for too long at a high speed. Allow the drill to cool down before using it again. If the drill continues to overheat, you may need to have it serviced by a qualified technician.
The drill vibrates excessively. This could be caused by a loose chuck or a worn-out bearing. If you notice excessive vibration, stop using the drill immediately and have it serviced by a qualified technician.

Here are some step-by-step solutions for some of the common problems with the DeWalt D28066N:

To fix a dead battery, you can either charge the battery or replace it. To charge the battery, simply plug it into the charger. The charger light will turn red when the battery is charging and turn green when the battery is fully charged. To replace the battery, you will need to purchase a new battery from DeWalt or a qualified retailer.
To fix a drill that makes a loud noise, you will need to identify the source of the noise. If the noise is coming from a worn-out bearing, you will need to replace the bearing. If the noise is coming from a stripped gear, you will need to replace the gear. If the noise is coming from a loose chuck, you will need to tighten the chuck.
To fix a drill that won't drill through hard materials, you will need to use a sharp drill bit. If the drill bit is dull, you can sharpen it or replace it. You may also need to use a higher torque setting on the drill.
To fix a drill that overheats, you will need to allow the drill to cool down before using it again. You may also want to try using the drill at a lower speed.
To fix a drill that vibrates excessively, you will need to tighten the chuck or replace the bearing.

I hope this helps!

DeWalt D28066N Manual

DeWalt D28066N Manual

Safety Information

Read and understand all instructions before using this tool.
Keep this manual for future reference.
Do not use this tool if it is damaged or malfunctioning.
Wear safety glasses and gloves when using this tool.
Always wear a dust mask when grinding concrete, masonry, or other dusty materials.
Keep bystanders away from the work area.
Do not use this tool in wet or damp conditions.
Do not use this tool to cut or grind metal.
Always use the correct size wheel for the application.
Do not use this tool for overhead grinding.
Allow the tool to cool down before storing it.

Before Use

Inspect the tool for any damage before using it.
Make sure that the guard is in place and adjusted properly.
Tighten all fasteners before using the tool.
Attach the correct size wheel for the application.
Do not use a wheel that is cracked, chipped, or damaged.
Do not use a wheel that is larger than the guard opening.

Troubleshooting

If the tool is not working properly, unplug it and inspect it for damage.
Do not attempt to repair the tool yourself. Contact a DeWalt service center for assistance.

Maintenance

Keep the tool clean and free of dust and debris.
Inspect the tool regularly for signs of wear or damage.
Replace any worn or damaged parts immediately.
Store the tool in a dry, cool place.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of three years from the date of purchase. If this tool fails within the warranty period, DeWalt will repair or replace it free of charge.

Contact Information

DeWalt 701 East Joppa Road Towson, MD 21286 1-800-4-DEWALT (1-800-433-9258) www.dewalt.com

Additional Information

The DeWalt D28066N is a 5-in/6-in rattail angle grinder with a 13 amp motor.
It has a dust ejection system to help keep the work area clean.
The tool comes with a two-position side handle and two guards (5-in and 6-in).
The DeWalt D28066N is backed by a three-year limited warranty.

Search This Blog

mediayellowcorp